BIXOLON SPP-R300 Spezifikationen PDF herunterladen (Seite 38)

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 38 -

ESC W

Function: Set print area in page mode

Code:

ASCII

ESC W xL xH yL yH dxL dxH dyL dyH

Hex

1B 57 xL xH yL yH dxL dxH dyL dyH

Decimal

27 87 xL xH yL yH dxL dxH dyL dyH

Range:

0 ≤ (xL + xH x 256) ≤ 65535 (0 ≤ xL ≤ 255, 0 ≤ xH ≤ 255)

0 ≤ (yL + yH x 256) ≤ 65535 (0 ≤ yL ≤ 255, 0 ≤ yH ≤ 255)

1 ≤ (dxL + dxH x 256) ≤ 65535 (0 ≤ dxL ≤ 255, 0 ≤ dxH ≤ 255)

1 ≤ (dyL + dyH x 256) ≤ 65535 (0 ≤ dyL ≤ 255, 0 ≤ dyH ≤ 255)

Default:

When paper width of 72mm is selected:

(xL + xH x 256) = 0 (xL=0, xH=0)

(yL + yH x 256) = 0 (yL=0, yH=0)

(dxL + dxH x 256) = 576 (dxL=64, dxH=2)

(dyL + dyH x 256) = 840 (dyL=72, dyH=3)

Description:

■ This command set the position and the size of the printing area in page mode as following.

• Horizontal starting position = [(xL + xH x 256) x (horizontal motion units)]

• Vertical starting position = [(yL + yH x 256) x (vertical motion units)]

• Horizontal printing area width = [(dxL + dxH x 256) x (horizontal motion units)]

• Vertical printing area width = [(dyL + dyH x 256) x (vertical motion units)]

Remarks:

■ The horizontal and vertical starting positions are out of the printable area, this command is canceled and the following

data is processed as normal data.

■ If (Horizontal starting position + Horizontal printing area width) is beyond the printable area, the Horizontal printing

area width is set to (Horizontal printing area - Horizontal starting position).

■ If (Vertical starting position + Vertical printing area width) is beyond the printable area, the Vertical printing area width

is set to (Vertical printing area - Vertical starting position).

■ This command is not effective in standard mode. If this command is processed in standard mode, the setting by this

command is effective when the printer returns to page mode.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 148 149

Keine Kommentare

BIXOLON SPP-R300 Spezifikationen Seite 38