BIXOLON SRP-352plus Spezifikationen PDF herunterladen (Seite 61)

SRP-350/352plusII

Rev. 1.01 BIXOLON

- 61 -

GS ( E

Function:

Set NV user memory area

Code:

ASCII

(

[parameter]

Hex

[parameter]

Decimal

[parameter]

Range:

None

Default:

None

Description:

This command stores the customized values to the NV user memory area and uses them for the printer operation. The

table below explains the functions available in this command. Executes commands related to the user setting mode by

specifying the function code fn.

Format

No.

Function

GS ( E pL pH fn d1 d2

Start the user setting mode

GS ( E pL pH fn d1 d2 d3

End the user setting mode (Performs a soft reset)

GS ( E pL pH fn [a1 b18...b11]...

[ak bk8...bk1]

Set value(s) for the memory switch

GS ( E pL pH fn a

Transmit the settings of the memory switch to the host

Remarks:

■ pL, pH is used to set the number of bytes following pH to (pL + pH x 256).

■ The change in the items of the NV user memory is available only after entering the user setting mode.

■ After completing the user setting mode (Function 2), the printer performs software reset to restore the initial settings

in effect at power on. Receive and print buffers are cleared as well.

■ Since frequent write operation by this command may deteriorate the performance of the NV memory, it is

recommended to write to NV memory when the significant change in the setting is required.

■ While processing this command, the printer remains busy. Therefore the data transmission by the host is not

available. The real time commands and LSB operations are not processed.

Differences:

None

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare

BIXOLON SRP-352plus Spezifikationen Seite 61

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen BIXOLON SRP-352plus