BIXOLON SPP-R200II Bedienungsanleitung

Windows Driver Manual SPP-R200II Mobile Printer Rev. 1.03 http://www.bixolon.com

SPP-R200II Rev. 1.03 - 10 - 9) When the following message box appears, click “Continue Anyway”. 10) Click “Finish”.

SPP-R200II Rev. 1.03 - 11 - 11) Open the printer properties window in the Windows OS. ※ Control Panel – Printers and Faxes. 12) Click “Print Test Pa

SPP-R200II Rev. 1.03 - 12 - 4-1-3 Via WLAN Port 1) Double-click the Windows Driver installation file. 2) Click “Next”. 3) Select “Wireless LAN”.

SPP-R200II Rev. 1.03 - 13 - 5) When the following message box appears, click “Continue Anyway”. 6) Click “Yes” to reboot the PC. 7) Open the pri

SPP-R200II Rev. 1.03 - 14 - 8) In the Ports tab, click “Configure Port…”. 9) Match the communication settings to those of the printer.

SPP-R200II Rev. 1.03 - 15 - 10) Click “Print Test Page” and check printing status. Proper installation of the driver is indicated if the test page is

SPP-R200II Rev. 1.03 - 16 - 4-2 Installing on Windows VISTA / Sever 2008 / 7 / 8 4-2-1 Via Serial Port or Bluetooth 1) Double-click the Windows Driv

SPP-R200II Rev. 1.03 - 17 - 4) When the following message box appears, click “Install”. 5) Click “Yes” to reboot the PC. 6) Open the printer pro

SPP-R200II Rev. 1.03 - 18 - 10) Click “Print Test Page” and check printing status. Proper installation of the driver is indicated if the test page i

SPP-R200II Rev. 1.03 - 19 - 4-2-2 Via USB Port 1) Double-click the Windows Driver installation file. 2) Click “Next”. 3) Select USB and click “Ne

SPP-R200II Rev. 1.03 - 2 - Table of Contents 1. Manual Information ...

SPP-R200II Rev. 1.03 - 20 - 4) When the following message box appears, click “Install”. 5) Click “OK”. 6) Turn off the printer and then turn it

SPP-R200II Rev. 1.03 - 21 - 7) Open the printer properties window in the Windows OS. ※ Control Panel – Hardware and Sound – Device and Printers. 8)

SPP-R200II Rev. 1.03 - 22 - 4-2-3 Via WLAN Port 1) Double-click the Windows Driver installation file. 2) Click “Next”. 3) Select “Wireless LAN”

SPP-R200II Rev. 1.03 - 23 - 5) When the following message box appears, click “Install”. 6) Click “Yes” to reboot the PC. 7) Open the printer pro

SPP-R200II Rev. 1.03 - 24 - 8) In the Ports tab, click “Configure Port…” 9) Match the communication settings to those of the printer.

SPP-R200II Rev. 1.03 - 25 - 10) Click “Print Test Page” and check printing status. Proper installation of the driver is indicated if the test page is

SPP-R200II Rev. 1.03 - 26 - 5. Windows Driver Settings The following functions can be configured after installing the Windows driver. 5-1 Paper 1

SPP-R200II Rev. 1.03 - 27 - 5-1-1 Paper Size Paper size of 58 x 297 mm is selected by default, and the following sizes can be selected. 58  297 m

SPP-R200II Rev. 1.03 - 28 - 5-1-2 Paper Type You can choose Receipt or Ticket as paper types. Receipt allows flexible paper length according to the d

SPP-R200II Rev. 1.03 - 29 - 5-2 Document Settings 1) Open the Printer Properties window for the corresponding OS. 2) In the “General” tab, click “P

SPP-R200II Rev. 1.03 - 3 - 1. Manual Information This Windows Driver Installation Manual provides information on installation, detailed specification

SPP-R200II Rev. 1.03 - 30 - 5-2-1 Send Commands The Windows driver serves to receive the content for print from an application and send it to the pri

SPP-R200II Rev. 1.03 - 31 - 5-3 Other Settings 1) Open the Printer Properties window for the corresponding OS. 2) In the “General” tab, click “Pref

SPP-R200II Rev. 1.03 - 32 - 6. Windows Driver Specifications 6-1 Fonts The Windows Driver of the printer supports the fonts listed below. Printing i

SPP-R200II Rev. 1.03 - 33 - Printer Fonts are defined as follows. 1) FontA1x2 - ANSI Character code support (Code Page 1252) - Character size (dot):

SPP-R200II Rev. 1.03 - 34 - 6-2 Special Functions This Windows driver supports the special functions as shown in the following table. Select the “Fon

SPP-R200II Rev. 1.03 - 35 - 6-3 Barcodes The Windows Driver supports the barcodes indicated below. This function is available when entering barcode d

SPP-R200II Rev. 1.03 - 36 - 7. Use of Windows Driver 7-1 Use of Visual Basic This section contains example codes to control the printer (BIXOLON SPP

SPP-R200II Rev. 1.03 - 37 - 7-1-3 Barcode Printing The following code is an example of the printing of the JAN8 (EAN) barcode. 'Print Bar Code

SPP-R200II Rev. 1.03 - 38 - 7-2 Use of WordPad 7-2-1 WordPad Environment Settings After running WordPad and setting the following conditions, conduc

SPP-R200II Rev. 1.03 - 39 - 7-2-3 Barcode Printing Use the Windows Driver of the printer to print the barcode. 1) Select the desired barcode from

SPP-R200II Rev. 1.03 - 4 - 4. Windows Driver Installation 4-1 Installing on Windows XP / Server 2003 4-1-1 Via Serial Port or Bluetooth 1) Double-c

SPP-R200II Rev. 1.03 - 40 - 7-2-4 Two-Dimensional Barcode Printing Use the Windows Driver of the printer to print the two-dimensional barcode. 1)

SPP-R200II Rev. 1.03 - 5 - 4) When the following message box appears, click “Continue Anyway”. 5) Click “Yes” to reboot the PC. 6) Open the prin

SPP-R200II Rev. 1.03 - 6 - 10) Click “Print Test Page” and check printing status. Proper installation of the driver is indicated if the test page is

SPP-R200II Rev. 1.03 - 7 - 4-1-2 Via USB Port 1) Double-click the Windows Driver installation file. 2) Click “Next”. 3) Select “USB” and then cli

SPP-R200II Rev. 1.03 - 8 - 4) When the following message box appears, click “Continue Anyway”. 5) Click “OK”. 6) Turn off the printer and then t

SPP-R200II Rev. 1.03 - 9 - 7) When the New Hardware Wizard appears for the installation of the Windows Driver, select the option as shown be