BIXOLON SRP-350 PlusC Bedienungsanleitung Seite 1

User’s Manual SRP-350/352plusA&C Thermal Printer Rev. 1.08 http://www.bixolon.com

Rev. 1.08 - 10 -SRP-350/352plusA&C1-2-3 USB2.0 Interface Pin No. Signal Name Assignment (Color) Function Shell Shield Drain Wire Fra

Rev. 1.08 - 11 -SRP-350/352plusA&C1-4 Setting the Dip Switches 1-4-1 Serial Interface (RS-232C) • DIP Switch 1 SW Function ON OFF Default1-

Rev. 1.08 - 12 -SRP-350/352plusA&C• Table 1 – Baud rate (bps) Selection Transmission Speed 1-6 1-7 1-8 Default2400 ON OFF OFF 4800 ON OFF ON

Rev. 1.08 - 13 -SRP-350/352plusA&C1-5 Setting the Memory Switches This printer has “Memory Switch” set which is software switches. Memory Switch

Rev. 1.08 - 14 -SRP-350/352plusA&C MSW2-8 MSW2-7 MSW2-6 MSW2-5 MSW2-4 MSW2-3 Character Table OFF OFF OFF OFF OFF OFF Page 0 437 (USA, Standard

Rev. 1.08 - 15 -SRP-350/352plusA&C1-6 Installing or Replacing the Paper Roll ※ NOTE Be sure to use paper rolls that meet the specifications. Do

Rev. 1.08 - 16 -SRP-350/352plusA&C1-6-5 Be sure to note the correct direction that the paper comes off the roll. 1-6-6 Pull out a small amount

Rev. 1.08 - 17 -SRP-350/352plusA&C1-7 Adjustments and Settings The SRP-350/352plus is set up at the factory to be appropriate for almost all use

Rev. 1.08 - 18 -SRP-350/352plusA&C1-9 Connecting the computer You need an appropriate interface cable. 1-9-1 Plug the cable connector securely

Rev. 1.08 - 19 -SRP-350/352plusA&C2. Self test The self-test checks whether the printer has any problems. If the printer does not function prope

Rev. 1.08 - 2 - SRP-350/352plusA&C Safety Precautions In using the present appliance, please keep the following safety regulations in order to

Rev. 1.08 - 20 -SRP-350/352plusA&C3. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer

Rev. 1.08 - 21 -SRP-350/352plusA&C4. Specification Item Details Printing Method Thermal Line Printing Dot Density SRP-350plus: 180 X 180 dpi (

Rev. 1.08 - 22 -SRP-350/352plusA&C5. Appendix 5-1 Cleaning Printer Paper dust inside the printer may lower the print quality. In this case clea

Rev. 1.08 - 3 - SRP-350/352plusA&C CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not us

Rev. 1.08 - 4 - SRP-350/352plusA&C Warning - U.S.A This equipment has been tested and found to comply with the limits for a Class A digital dev

Rev. 1.08 - 5 - SRP-350/352plusA&C Introduction The SRP-350/352plus Roll Printer are designed for use with electronic instruments such as syste

Rev. 1.08 - 6 - SRP-350/352plusA&C Table of Contents 1. Setting Up the Printer ...

Rev. 1.08 - 7 - SRP-350/352plusA&C1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged

Rev. 1.08 - 8 - SRP-350/352plusA&C1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connecto

Rev. 1.08 - 9 - SRP-350/352plusA&C1-2-2 Parallel Interface (IEEE1284) Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nS