BIXOLON SLP-T400II Bedienungsanleitung

User's Manual Label Printer Rev. 1.00 SLP-T400II / T400IIE SLP-T403II / T403IIE http://www.bixolon.com

Rev. 1.00 - 10 -SLP-T400IIx/T403IIx3. Installation & Usage 3-1 Power Connection Connect power to the printer as shown below. 1) Tu

Rev. 1.00 - 11 -SLP-T400IIx/T403IIx3-2 Interface Cable Connection Connect the interface cable as shown below. This printer supports the following c

Rev. 1.00 - 12 -SLP-T400IIx/T403IIx3-3 Paper Installation 1) Open the Paper Cover. 2) Spread the paper holder and insert paper as shown. 3) Ope

Rev. 1.00 - 13 -SLP-T400IIx/T403IIx3-4 Ribbon Installation 3-4-1 Type of Ribbon 1) Type by Film Coating Location - Take note before ribbon purchase

Rev. 1.00 - 14 -SLP-T400IIx/T403IIx3-4-2 Inserting a One-Inch Core Ribbon 1) Insert the Holder ribbon into the core and ribbon. (keep note of ribbon

Rev. 1.00 - 15 -SLP-T400IIx/T403IIx3-4-4 Knob Adjustment by Ribbon Length Ribbon lengths of 74m, 100m (0.5” core), and 300m (1” core) can all be use

Rev. 1.00 - 16 -SLP-T400IIx/T403IIx3-4-5 Narrow Ribbon Installation When using ribbons of widths of 110mm or lower, install in a centered position o

Rev. 1.00 - 17 -SLP-T400IIx/T403IIx3-5 LED Display 3-5-1 Button Operations Printer state before operation Button Operation procedure Printer ope

Rev. 1.00 - 18 -SLP-T400IIx/T403IIx3-5-2 LED indicator for various printer statuses LED 1 LED 2 Printer Status Color Status Color Status Green On

Rev. 1.00 - 19 -SLP-T400IIx/T403IIx3-6 Test printing 3-6-1 Printing using Windows driver 1) Install the Windows driver. Refer to the “Windows drive

Rev. 1.00 - 2 - SLP-T400IIx/T403IIx Table of Contents ※ Manual Information & Usage Precautions ...

Rev. 1.00 - 20 -SLP-T400IIx/T403IIx4. Self-Test The self-test checks whether the printer has any problems. - Firmware version, printer configurati

Rev. 1.00 - 21 -SLP-T400IIx/T403IIx5. Detailed features 5-1 Printer setting using utility program Various printer settings can be changed using

Rev. 1.00 - 22 -SLP-T400IIx/T403IIx 5-2 Stand-alone Configuration Mode Various modes can be executed using buttons and LED only. 5-2-1 How to start

Rev. 1.00 - 23 -SLP-T400IIx/T403IIx5-3 Pause/Cancel During multiple-page print jobs, the Pause and Cancel button can be used to temporarily cease pr

Rev. 1.00 - 24 -SLP-T400IIx/T403IIx5-4 Media Calibration This printer has been designed to recognize the gaps with most print papers, but sometimes

Rev. 1.00 - 25 -SLP-T400IIx/T403IIx5-5 Smart Media Detection • Printer executes this function when necessary without user input and media configur

Rev. 1.00 - 26 -SLP-T400IIx/T403IIx 5-7 Auto Calibration Mode 2 Media type is configured after feeding one meter of paper for accurate paper detecti

Rev. 1.00 - 27 -SLP-T400IIx/T403IIx5-8 Manual Calibration Mode Manual-calibration of media detection can be used when the printer cannot detect a me

Rev. 1.00 - 28 -SLP-T400IIx/T403IIx5-9 Cover Closing Mode 1. About Cover Closing Mode • The printed area may become out of range of paper if the pap

Rev. 1.00 - 29 -SLP-T400IIx/T403IIx 5-11 Factory Reset This function is used to reset the printer settings to factory default settings. 5-11-1 How

Rev. 1.00 - 3 - SLP-T400IIx/T403IIx Manual Information ※ Manual Information & Usage Precautions This user manual contains basic information for

Rev. 1.00 - 30 -SLP-T400IIx/T403IIx4) Remove one sheet of the label paper, and insert the paper as shown in the image below. - Prior to removing a la

Rev. 1.00 - 31 -SLP-T400IIx/T403IIx5-13 Using Fan-Fold Paper Supplying paper to the printer externally is done as follows. 5-13-1 Printer Preparati

Rev. 1.00 - 32 -SLP-T400IIx/T403IIx5-14 Auto Cutter For auto paper cutting, products equipped with auto cutter are available. In factory setting, t

Rev. 1.00 - 33 -SLP-T400IIx/T403IIx6. Cleaning Head Printing quality might be degraded by dust, foreign substance, adhesive substance, or other poll

Rev. 1.00 - 34 -SLP-T400IIx/T403IIx6-2 Cleaning Sensors, Roller or/and Paper Path 1) Open the paper cover and ribbon assembly, and remove the paper

Rev. 1.00 - 35 -SLP-T400IIx/T403IIx7. Appendix 7-1 Specifications Item Description Printer Printing Method Thermal Transfer / Direct Thermal Pri

Rev. 1.00 - 36 -SLP-T400IIx/T403IIx7-2 Certification 1) EMC & Safety Standards • Europe: CE EMC,CB-Scheme:IEC60950-1, GS: EN60950-1: 2001 • No

Rev. 1.00 - 4 - SLP-T400IIx/T403IIx Safety Precautions In using the present appliance, please keep the following safety regulations in order to pre

Rev. 1.00 - 5 - SLP-T400IIx/T403IIx CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use

Rev. 1.00 - 6 - SLP-T400IIx/T403IIx Other Precautions The copyright for this user manual and various other manuals is property of the BIXOLON Co.,

Rev. 1.00 - 7 - SLP-T400IIx/T403IIx1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer f

Rev. 1.00 - 8 - SLP-T400IIx/T403IIx2. Product Part Names Feed Button Cover Peel-off (Option) Cover Lever Printer HeadPaper Holder Paper

Rev. 1.00 - 9 - SLP-T400IIx/T403IIx Power Switch IEEE1284 (Parallel) USB Fan-Fold or Exter Paper Power Jack