Bixolon SPP-R400 Bedienungsanleitung PDF herunterladen (Seite 15)

Rev. 1.02

- 15 -

SPP-R400

3-2-4-2 Battery Charging

1) Insert the battery into the quad battery

charger as shown in the figure on the

left.

2) Gently slide the battery until it reaches

the bottom of the charger.

3) Charging starts as soon as the battery

is completely inserted.

4) After charging, remove the battery from

the quad battery charger.

NOTE

Battery charging status descriptions are as follows.

Lamp

Charge Status

Charge Time

Red Lamp On

Charging

Within four hours

Green Lamp Blinking

Over 80% Charged

Green Lamp On

Fully Charged

Red Lamp Blinking

Error

Replace or Reinstall Battery

CAUTION

1. If the red lamp of the charger blinks, install the battery again.

2. If the red lamp continues to blink despite several attempts (4 ~ 5 times) to

install the battery, contact your local dealer.

3. The charging time may vary depending on the type of the charger or ambient temperature.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Keine Kommentare

Bixolon SPP-R400 Bedienungsanleitung Seite 15